DIY Pallet Chicken Coop At Backyard
Pallet Chicken Coop – Making a chicken coop does not have to be expensive or difficult. Only a few pallets are needed (the number varies depending on the structure to be assembled), screws, tips, screwdriver (better electrical that there is much to screw), hammer, chisel (to separate the tables from the pallets well), A saw (also better electrical) to cut the tablets to the necessary measure and patience (a helper comes great).
The first thing is to separate the tablets from the pallets. You have to be very careful to break them. There are different ways of nailing so with each pallet chicken coop you find an adventure so that the boards do not break apart. Once you have the pallets dismantled, it is good to sort the wood obtained, so, depending on the length, width and hardness of the boards give you an idea of what you may need. Then mount the base. Better to use the plumper boards, so they hold more.
And now to ride the walls! I did the 1st one back and then one side. The other side I put a door to catch the eggs from outside and in the front, the door a little to the side so that it does not catch a cold while laying eggs. Then the roof that can be put sloped by the water, but I put it flat since the pallet chicken coopis covered by the top.More reader came from this term: making a chicken coop from pallets , chicken coop plans made from pallets , how to build a pallet chicken coop , chicken coop from pallets plans , building a chicken coop from pallets , build chicken coop with pallets , pallet coop plans , build a chicken coop from pallets , chicken coop made with pallets , how to build a chicken coop from pallets